home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / radiomd3.zip / TS440S.40 < prev    next >
Text File  |  1991-02-22  |  2KB  |  37 lines

  1. ts440s.40
  2.  
  3. From: KD2EJ@N2EYR
  4. To: ALL@ALLUSA
  5. Subject: TS-440S DISPLAY SOLUTION
  6.  
  7.  
  8.  I finally took the time to inspect carefully the problem on the TS-440S
  9.  display problem. The first thing was to check the EPROM socket on the
  10.  display board. I found that the socket was not in good shape.
  11.  The IC was very loose and the socket is of very poor quality. I removed
  12.  the socket from the board with a solder sucker, making sure that none of the
  13.  wires connected to the display board was damaged or pulled out.
  14.  
  15. You have to remove the 4 screws that hold the board to the front panel, so
  16. that the board is free and can swing open so you can have access to the other
  17. side. After this is accomplished, the rest is easy. Even though Kenwood says
  18. to remove the socket and solder the eprom right to the board. I chose not to
  19. solder the chip to the board. I decided to replace the socket with one bought
  20. at Radio Shack for 0.89 cents. This particular socket has the connections 
  21. right on the surface, so that when you place the Eprom on it, you can see that
  22. good contact is being made on each leg of the chip. The socket is called a
  23. low profile socket.
  24.  
  25. I soldered the socket to the board and replaced the eprom. I carefully 
  26. placed all the wires were they belonged and replaced the metal cover over
  27. the display board. When everything was back in place I turned the rig on
  28. holding down the (A=B) indicator and did a reset. The freq display showed
  29. 14.000 mhz. The display is working fine so far, and all seems to be back
  30. to normal. I would not try this operation unless you have the right tools
  31. to desolder the socket, and a worktable with proper lighting. There are 
  32. lots of wires to worry about. Be careful.. It beats sending it back to 
  33. Kenwood.         Kd2ej ......  Winston .......
  34.  
  35.  
  36.  
  37.